OMEX-12 Loopie Sling (1.8m EWL)
Adjustable to 1.8m EWL with an SABL of 4740kg
Loopie Slings are adjustable continuous loop slings made from 12-strand single braid rope that makes knotless rigging possible. As one end of the rope passes through the core of the sling, when the load is applied the outer braid becomes tight and firm around the rope inside. You can quickly set all hardware without tying any knots thanks to its specialised design. Slack must be kept to an absolute minimum.
NEVER USE IN STRAIGHT LOOP FORMATION ONLY USE IN A CHOCKED CONFIGURATION - Always centre the chocked loop to the centre of the spliced area.
Manufactured from STEIN OMEX-12 a 12-strand single braid rope that offers high strength with low stretch and outstanding abrasion resistance. OMEX has a two end per carrier construction which creates a larger void in the middle of the rope which makes it easier to splice. The coating helps reduces the new ropes tendency to snag, greatly enhances abrasion resistance.
Use of this product: It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users of these products should seek professional training from a fully qualified and competent instructor prior to use. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability for its improper use.
This product requires inspection prior to being put in to service and prior to each time it is used. DO NOT SHOCK LOAD THIS PRODUCT - Product User Manual is available from the download section
|Splicable Ave Break Load (kg)||4740|
|Length (m)||Adjustable to 1.8m EW|
|GTIN / EAN13||5060483287515|