COPIOUS RingLoop R40

STEIN - COPIOUS RingLoop R40 Sling

the STEIN RingLoop is also independently tested and certified to EN 795B:2012 as a stand alone product. When attached to the SKY-Anchor using a Three Wrap Prusik this transforms the Standard SKY-Anchor into a fully length adjustable version.

Friction cords which contain elements of Polyester require rigorous inspection on a regular basis before, during, and after each climb.(Please refer to the supplied User Manuals)

STEIN P-TEC accessory cord is a construction consisting of a polyester/technora cover and a polyester core makes this rope highly abrasion resistant, grippy, and heat resistant.

● Independently Tested in configuration with STEIN Lines ACR32 / OMEGA 32/12

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

Certified to EN795(B):2012 as a finished product - Both CE & UKCA Certified

STEIN P-TEC Accessory Cord has been independently tested to CE EN564 Mountaineering equipment - Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter!