ENERGIZE-24 - 25m Spliced 25m UK Spliced Eye
Yale Cordage - XTC ENERGIZE - 25m Spliced Eye
YALE Cordage - XTC ENERGIZE- 25m Climbing Line with Spliced Eye Termination
YALE ENERGIZE is a technically advanced 24-strand CE certified low stretch Double Braid rope designed especially for the tree care industry.
Building on the YALE Cordage philosophy “Passion for the pursuit of better performance” the 11.7mm diameter provides the perfect balance between the weight of 11mm climbing line and the feel of 12.6mm climbing line; the vibrant Orange & Yellow colours guarantee exceptional visibility in the tree.
The vibrant 24-strand outer sheaf is made from a premium grade Polyester with an energy-absorbing Nylon inner core designed to offer exceptional performance when used in conjunction with modern day climbing techniques and mechanical ascent/descent devices.
Whether you are a traditional Arborist using traditional climbing techniques or a more advanced climber, ENERGIZE is suited to both MRT (Moving Rope Technique) or SRT (Stationary Rope Technique) climbing systems.
ENERGIZE IS DISTRIBUTED EXCLUSIVELY BY FLETCHER STEWART
YALE Cordage XTC ENERGIZE is CE Certified to BS EN1891:1998 Standard Type A
Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)
Spliced Eye Termination:
The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.
Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.
EU DECLARATION OF CONFORMITY
The products referred to in the User Manual are classed as Personal Protective Equipment (PPE) by the European PPE Regulation (EU) 2016/425 and have been shown to comply with this Regulation through the Harmonised European Standard. The manufacturer herewith declares that this product is in conformity with the provisions of the following directives:
BS EN1891:1998 Standard in accordance with section - 4.12.2 Static strength with terminations.
SATRA Technology Centre, Clonee, D15 YN2P, Ireland (Notified Body 2777 & Module C2 Assessment)
Manufacturer or authorized representative:
Fletcher Stewart (Stockport) Ltd, Unit 8E, Newby Road Industrial Estate, Hazel Grove, Stockport, Cheshire, SK7 5DA, UK
|Application||DRT & SRT|
|GTIN / EAN13||5060660852994|