X5004VE Vented Helmet GREEN (04)
3M™ SecureFit™ Safety Helmet X5000 - Dual Standard EN12492 and EN397
Version VE = Vented Non-Reflective
The new 3M™ SecureFit™ Safety Helmet for comfort and protection of those who work at and around height.
The X5000 Series was Inspired by modern climbing helmets; the brimless design gives a clear upward view so you can stay aware of your surroundings and avoid risks. It’s ideal for a variety of situations, including working at heights or for industrial jobs that involve heavy machinery or other hazards.
The X5000 Series is designed and certified to meet both EN12492 and EN397 standards and, with the unique 4-point chin strap selector system, you can switch between either depending on the safety requirements of your workplace. The chin strap is fitted with a standard buckle.
With six different settings you can adjust the height of the suspension in the front and the rear to fit a variety of head shapes. With the easy-to-adjust, 6-point ratchet suspension system you can smoothly tighten the headband as needed. It has the exclusive, patented 3M™ Pressure Diffusion Technology which not only provides a secure fit but, by reducing up to 20% of forehead pressure compared to conventional 3M helmet suspensions improving user comfort.
The helmet features a proprietary 3M™ UVicator™ Sensor that changes from red to white when exposed to damaging levels of ultraviolet (UV) light. As UV rays can cause helmet shells to become brittle and compromise their protection level, the sensor changing colour indicates that it’s time to replace the helmet.
Accessory slots and clips are designed to be compatible with a variety of 3M face shields, earmuffs and other accessories.
The X5000 Series has been configured, tested, and approved for use in combination with a series of 3M Products.
- All internal components are removeable and replaceable
- Suspension system using patented Pressure Diffusion Technology, reducing pressure on forehead
- An easy-turn ratchet suspension system fitted low on the head for comfort and security
- Standard 6-point suspension for X5000
- A 4-point chin strap with an easy switch between EN 12492 and EN 397 standards (for X5000 only)
- Standard chin strap with a quick-release buckle
- Patented 3M™ UVicator™ can help indicate when it is time to replace the helmet as a result of excess exposure to ultraviolet (UV) radiation
- Ventilated for increased airflow within the shell
- Integrated clips to help hold elastic bands used with headlamps
- Helmets meet the requirement for Lateral Deformation
- Replaceable and washable sweatband
- Approved for use at -30°C to +50°C
- Weight 351g
- Head Size 50 – 63cm
- Maximum recommended product life up to 5 years from date of manufacture (The product life as defined above is indicative data. The product life is subject to many external and non-controllable factors and should not be interpreted as a warranty)
Please note: the X5000 is either in EN12492 (helmets for mountaineers) mode or in EN397 (industrial safety helmets) mode but cannot meet both EN-standards simultaneously.
- Never modify or alter the safety helmet
- Do not use this safety helmet against hazards other than those specified in the user instruction
- Use, store and maintain the safety helmet in accordance with the user instruction
Testing and approval
The 3M™ X5000 and X5500 SecureFit™ Safety Helmets meet the requirements of the PPE Regulation (EU) 2016/425 and are thus CE marked. The products have been tested and approved by BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, UK, Notified Body No. 0086.
X5500 has been tested and approved in accordance with EN 397:2012+A1:2012. X5000 has been tested and approved in accordance with EN 397:2012+A1:2012 and with EN 12492:2012. Certain versions of X5500 and X5000 have been tested and approved in accordance with EN 50365:2002.
The use of the 3M product described within any document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within relevent documents are inherent to specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of the document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within the relevent product document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.
Personal Protective Equipment is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to Physical Hazards. 3M offers advice on the selection of products, and training in the correct fitting and usage. For more information on 3M products and services please contact 3M.
|Helmet Standard||Dual Standard - EN12492 and EN397|
|Removeable Inner Lining||Yes|
|Head Size cm||50 - 63|
|Temperature Range||-30°C to +50°C|
|UK Stocked Colour||Standard Stocked Colour|
|GTIN / EAN13||4054596592469|